LYKO Systems

Subscribed

You have successfully submitted your enquiry. Someone from our company will respond ASAP

Fuel-less Autonomous Energy Units for Inhospitable Environments

Website
Email Address
Address
1454 JB Michaud,
Drummondville,
J2C 7V3,
Quebec,
Canada
Phone
Fax Number
Share

header

LYKO Systems designs and distributes autonomous energy units. These solar and wind powered systems are primarily used by the mining industry to power repeater radio systems. The robustness and reliability of LYKO systems allow for deployment in the most remote locations where climate and terrain are challenging.

Energy units for mining conditions

With automation and computer use growing more common in the mining business, the amount of information that has to be carried between the mobile equipment and the fixed installation is rapidly increasing. Telecom manufacturers are tackling this challenge by developing high bandwidth radio systems that can be quickly deployed in the field.

But all this equipment needs to be powered – and this can prove difficult in mining conditions. The ever-changing nature of mine layouts often makes it impossible to install permanent structures and the mobile solutions offered on the market are not likely to survive the hostile mining terrain and climate.

The Numad unit is designed for semi-permanent installation. It can be deployed using a standard flat-bed trailer.
The Numad is a modular and scalable wind and solar powered system. It can be sized to accommodate several load requirements.
Four AMU-900 units being assembled.
The AMU-900 unit folded for easy relocation. Relocation of LYKO's units is often required by changes in pit shapes or during blasts.
The ease, speed and safety of deployment are LYKO's main design criteria.
The three compartments of this LYKO contain, respectively, a battery bank (rear) with enough room for a backup generator (center), all the control systems and charge controllers (front).
LYKO's software allows us to accurately size the battery bank and solar array based on the GPS coordinates where the unit will be deployed.
The wind turbine and solar panel systems complement each other in locations where climate is difficult; either low wind or reduced sun exposure for prolonged periods of time.
Several LYKO units have been deployed in locations that cannot be accessed for several months of the year. The remote management, reliability and ruggedness are critical for these applications.

Based on a list of specific criteria expressed by the mining industry, LYKO engineers developed the AMU-900 energy unit. The AMU-900 has been successfully deployed in several mining sites in northern Canada, where temperatures often reach -40°C. LYKO products are designed to work in an autonomous fashion for several months. Most system parameters can be remotely controlled and monitored, which further reduces the maintenance requirements of the unit.

Remote management and monitoring

Most LYKO units are deployed in remote locations where maintenance visits are expensive – or simply not possible during some periods of the year. With LYKO units, all health parameters can be remotely monitored, and e-mail alerts can also be set in order to prevent downtime and ensure the load is safely powered, 24/7 – all year long.

Simulation software

To ensure all units are properly sized, LYKO’s engineers have developed a script that analyses environmental data and can accurately predict whether or not a certain configuration could power a determined load in a specific geographic location. The GPS coordinates, solar array size, and the battery bank dimensions are supplied as the input to the software, and the output graph shows the battery level during every season of the year. Every customer can therefore be assured that the units they deploy will perform as they expect.

White Papers

Address
SYSTÈMES LYKO INC.
1454 JB Michaud
Drummondville
J2C 7V3
Quebec
Canada

Email address
Phone
Fax Number