Grease rarely features in mining strategy discussions, yet how it is managed can directly impact equipment availability, maintenance workload and operational risk. The following five steps set out a practical way to bring more clarity and consistency to grease care across mining industry operations.

1. Selecting the right grease for each application

Many mining operations still rely on a limited set of greases for a wide range of processes. As equipment evolves and operating conditions shift, such an approach can leave critical components under-protected or over‑specified. Getting the selection right means looking closely at each application – how fast it runs, how heavily it is loaded, the temperatures it endures, and the environment it works in.

High‑speed electric motors, for example, typically benefit from greases formulated with lower base oil viscosity and good mechanical stability, allowing reliable lubrication while minimising heat generation at high operating speeds. While bucket pins, pivot pins and heavily loaded chassis components need a grease with robust extreme-pressure performance, containing molybdenum disulphide (MoS₂) and the ability to remain in place under shock loads, sliding motion, and persistent water spray, dust and mud.

Mobilgrease XHP™ Mine Series[i] is specifically designed for such extreme demands, offering a lithium‑complex, molybdenum disulphide‑containing range that provides strong extreme‑pressure and anti‑wear performance, excellent resistance to water washout and spray‑off, as well as NLGI grades suited to both centralised systems and general chassis lubrication. Matching grease to duty in this way can help protect equipment in adverse mining conditions, while also extending component life and reducing lubrication‑related incidents.

2. Setting appropriate re-greasing intervals

Once the right product is in place, the next key step is how often it should be applied. Re-greasing intervals should reflect how the equipment is actually run – its hours, loads and ambient conditions – with exposed, high‑purge points typically needing shorter intervals than sheltered bearings on centralised systems.

Predictive maintenance and condition monitoring can refine these schedules further by tying lubrication to real performance data, allowing operators to intervene before issues develop. This more targeted approach can help reduce unexpected breakdowns and unplanned maintenance and help keep equipment within a safer, more stable operating window.

Advanced condition monitoring programmes, including vibration analysis, thermography and lubrication reviews, together with Mobil™ expert support and lubrication expertise, can help identify lubrication-related issues before they affect equipment reliability, enabling more informed maintenance decisions and optimised lubrication practices.

3. Keeping storage, handling and dispensing clean

Even a specially selected grease, applied at the right interval, will struggle if it is contaminated before it reaches the equipment. Greases are best kept in closed, clearly labelled containers, sheltered from extremes of temperature and weather. Simple, consistent labelling or colour‑coding schemes, can help avoid mix‑ups between different products or NLGI grades.

Dispensing tools – from grease guns to lines and pumps in central lubrication systems – benefit from regular cleaning and inspection so that contaminants are not pushed into bearings along with the product. When storage and handling are treated as part of the lubrication system rather than an afterthought, the grease has a better chance of performing as designed.

4. Applying grease correctly

How grease is applied has as much impact as what is applied. Over‑greasing can lead to overheating, increased pressure on seals and unnecessary energy losses, while under‑greasing leaves surfaces exposed, allowing metal-to-metal contact, accelerating wear and, in some cases, creating noise and vibration that operators must then manage. Misidentified lubrication points or poor access can compound the issue.

Clear procedures that specify where to lubricate, how much to use and which tools to use can make a substantial difference. This is especially true on mining equipment exposed to shock loading, contamination and wide temperature swings.

For equipment connected to centralised systems, correct application also means ensuring that lines, metering devices and pumps are suited to the grease’s consistency and pumpability. Mobilgrease XHP™ Mine products are formulated with central system capability in mind – particularly the softer grades, which support reliable flow at low temperatures and over long pipe runs.

5. Verifying performance through inspections and monitoring

Without an effective condition monitoring programme, many lubrication issues reveal themselves only when something has already gone wrong. Issues can include when a bearing runs hot, a seal fails, or a component reaches its end-of-life earlier than expected.

Regular inspection and monitoring help teams understand how grease is performing in service, from simple checks for leaks, noise, temperature changes and contamination to more structured condition monitoring and record‑keeping. These insights allow product choice, quantities and intervals to be tuned to real operating conditions, giving confidence to optimise schedules when components remain well protected and to adjust practices when issues emerge. Treated this way, grease care becomes a continuous improvement activity that supports longer asset life, more predictable maintenance and a stronger safety culture around critical equipment.

Common mistakes to avoid with greases in mining

Across busy sites, a few recurring issues tend to undermine otherwise sound lubrication plans: cross-contamination from incompatible greases, schedules that are not updated as duty or conditions change, and procedures that exist only informally rather than in documented form.

To help reduce avoidable failures and unplanned work, focus on a simpler, well‑defined Mobilgrease XHP™ Mine product set for off‑highway and mining equipment, review re-greasing intervals on a regular basis, and capture agreed methods in clear, accessible documentation.

Ensuring lubrication consistency in mining operations

Consistency is the real measure of any lubrication strategy. Differences in practice from one crew to another can undermine technical choices, making it difficult to compare performance or replicate successes. Standardising procedures – backed by training, checklists and simple monitoring tools – helps ensure everyone uses the optimum grease correctly and at the right time, making performance more repeatable and auditable. Clear documentation then provides traceability of what was done, when and with which product.

Working in partnership with a lubricant supplier such as Mobil allows mines to align product selection, handling guidance and on‑site technical support. In practice, that means embedding Mobilgrease XHP™ Mine Series within a practical, site‑ready framework that supports day‑to‑day reliability, safety and longer‑term improvement.

How grease can extend mining equipment life

Grease care rarely attracts the same attention as larger capital decisions, yet it touches almost every rotating asset on a mine. When it is treated as a structured, end‑to‑end process – from product selection and re-greasing timing through to storage, application and verification – it can deliver meaningful gains in equipment life, cost control and safety.

Mobilgrease XHP™ Mine Series has been designed for the demands of off‑highway and mining equipment, with strong extreme‑pressure performance, 5% MoS₂ (Moly), resistance to water washout and the ability to operate in both centralised systems and harsh, exposed locations. Combined with the five steps outlined here, the product provides a solid foundation for moving away from reactive fixes and towards a more stable, predictable and efficient way of running critical mining equipment.

Notes:
Maintenance costs may vary and are based on application-specific operating conditions. Not a guarantee of financial performance. Actual results can vary depending upon the type of equipment used and its maintenance, operating conditions and environment, and any prior lubricant used. Refer to OEM application requirements and re-greasing intervals for your equipment.


[i] https://www.mobil.com/en-be/grease/pds/gl-xx-mobilgrease-xhp-mine-series