Typical Enquiries

Quote

Please quote best price and delivery for the following STEEL CORD conveyor belt:

Overall length 3000 metres
Width 1000mm
Grade SP1250
Covers 6 + 6

Quote

Quote

we are looking for a reagent to float ilmenite agains olivine and pyroxene both high in iron.

Quote

Quote

please quote us your best price, terms and condition for the item listed below.

1. 48.00 pcs. 20.5" x 48" 0.5mm mesh screen, profile plastic. Usage: cyclone rinsing screens (for 3 units vibrating screen)

Quote

Quote

we need 20 pumps to inject a 20 wt% slurry of fine-particles into a series of high- pressure reactors (227 atmospheres) each pump must be able to inject 0.5-2.0 cubic meters per hour

Quote

Quote

Please provide price and delivery on the following cable: 20,000 FT 30 AMP, TYPE 3, CL I Make in accordance with MIL-C-29184/4-02, NEMA Type G 4 Conductor, 8 AWG with not less than 133 wires per conductor and 4 grounding conductors, 12 AWG with not less than 19 wires per conductor.

Quote

Quote

Could you please provide me with full details of your range of LHD loaders for hard rock mining.

Quote

Quote

We are interested in chemicals or systems for flocculation-settling and -filtering of alpha-alumina/silicate systems. Could you suggest products in your line which alone or in combination would be good test candidates? Are samples available for in-house testing of their effectiveness?

Quote

Quote

We have a requirement of crusher having following details: 1. Material : Coal 2. Max. feed size : 250 mm (10 inches) 3. Output required: -8 mesh 95% & -4mesh 100% 4. Capacity : 3.5 TPH 5. Application : Sampling System We would require single stage crushing with no recirculation of fines.

Quote

Quote

Please contact me in connection with concrete breaking products. We need to break 1 cum of 50 MPa concrete in 45 minutes.

Quote

Quote

Please send us full information about GA 30 and GA 22 compressors (FF).

Quote

Quote

PLEASE PROVIDE QUOTATION FOR :A.S.H Double roll bottom ash crusher/s Clinker size up to 300x300x300mm reducing to 25mm at a nominal rate of 14mtph with max of 20mtph, Bulk density of ash 750kg/m3 Option : for Primary and secondary if required.

Quote

Quote

Please quote 6 units, ROTARY DRILLS FK 64, BOHLER BOHR This drill is used in coal mining. Aditionally we need ROTARY DRILLS BIT, 44 mm diameter and DRILLING SPINDLES

Quote

Quote

Heavy duty, high temperature resistant conveyor for 6 tonne load ( 3 bands at 10 metres long x 2 metres wide. Contract available.

Quote