Home > Products and Services > Image Galleries > Shaft Equipment, Winding and Winches Gallery

go to Siemag - GHH Mining Technology

Shaft Equipment, Winding and Winches

ABB AB-Mine Hoists

ABB Friction hoist. The picture shows a multi-rope ABB friction hoist with an over-hung synchronous AC-motor.
ABB Friction hoist. The picture shows a multi-rope ABB friction hoist with an over-hung synchronous AC-motor. 		The central control room at LKAB, Kiruna, from where the whole hoisting plant of the world's largest underground mine is controlled.
The central control room at LKAB, Kiruna, from where the whole hoisting plant of the world's largest underground mine is controlled. 		Cannington mine tower. ABB has delivered a complete package of mechanical and electrical equipment including all shaft equipment such as skips, ropes, guide ropes, catch gear and over wind arrestors.
Cannington mine tower. ABB has delivered a complete package of mechanical and electrical equipment including all shaft equipment such as skips, ropes, guide ropes, catch gear and over wind arrestors.
The new hoist at Lubin II West mine in Poland. The hoist, including new drive and control equipment, was installed and commissioned during a production stop of only eight days.
The new hoist at Lubin II West mine in Poland. The hoist, including new drive and control equipment, was installed and commissioned during a production stop of only eight days. 		ABB Hoist System under integrated factory test before shipment to the customer for installation and commissioning.
ABB Hoist System under integrated factory test before shipment to the customer for installation and commissioning.

Alimak-Raise Climbers for Mining and Underground Engineering

The Alimak Climber is suitable for all kinds of raising in mines and underground civil engineering projects such as shafts and penstocks for hydro-electric power plants, ventilation shafts for road tunnels etc.
The Alimak Climber is suitable for all kinds of raising in mines and underground civil engineering projects such as shafts and penstocks for hydro-electric power plants, ventilation shafts for road tunnels etc. 		Work cycle with Alimak Raise Climber.
Work cycle with Alimak Raise Climber. 		Alimak RCM-6 at Kiruna 2000 project.
Alimak RCM-6 at Kiruna 2000 project.
A flexible and economical method for excavation of shafts with large cross-sections is to make a pilot raise with the Alimak Raise Climber.
A flexible and economical method for excavation of shafts with large cross-sections is to make a pilot raise with the Alimak Raise Climber. 		Alimak U-600 Service/Inspection lift. It requires no machine room and it can be installed at any inclination.
Alimak U-600 Service/Inspection lift. It requires no machine room and it can be installed at any inclination.

Davy Markham Ltd-Design, Manufacture and Machining of Heavy Engineering Components

Davy Markham has a long history in the design, manufacture, fabrication and machining of heavy and complex engineering components and assemblies.
Davy Markham has a long history in the design, manufacture, fabrication and machining of heavy and complex engineering components and assemblies. 		Davy Markham produces a wide range of hoists, winches, sheaves and other equipment for the worldwide mining industry.
Davy Markham produces a wide range of hoists, winches, sheaves and other equipment for the worldwide mining industry. 		The company handles large turnkey projects, utilising its expertise in hydraulics, controls, engineering, installation and servicing.
The company handles large turnkey projects, utilising its expertise in hydraulics, controls, engineering, installation and servicing.
Davy Markham's overall objective is to satisfy customer demands in a timely and cost-effective manner, without compromising on quality or safety.
Davy Markham's overall objective is to satisfy customer demands in a timely and cost-effective manner, without compromising on quality or safety. 		Davy Markham has built upon the company’s expertise in building tunnelling machinery for the Channel Tunnel, London, Paris and Moscow metros and other major tunnelling projects.
Davy Markham has built upon the company’s expertise in building tunnelling machinery for the Channel Tunnel, London, Paris and Moscow metros and other major tunnelling projects.

INCO-Mining Hoists and Complete Equipment for Vertical Mining

Control panel with touch screens.
Control panel with touch screens. 		Air-conditioned cabin of the machinist.
Air-conditioned cabin of the machinist. 		Two-motor four-rope mining hoist with a friction disc.
Two-motor four-rope mining hoist with a friction disc.
Skip with a payload of 24t.
Skip with a payload of 24t. 		Electro-hydraulic brake system Frenomatik HR11K with constant retardation of the braking.
Electro-hydraulic brake system Frenomatik HR11K with constant retardation of the braking.

Jacks Winches-Winching, Lifting and Jacking Equipment Hire

Jacks Winches provide quality winching, spooling, lifting and jacking equipment for long and short-term hire.
Jacks Winches provide quality winching, spooling, lifting and jacking equipment for long and short-term hire. 		Our team comprises of hands on professionals with sound knowledge in practical applications to handle your site requirements.
Our team comprises of hands on professionals with sound knowledge in practical applications to handle your site requirements. 		JW's supply a range of compressed air winches, these include air coolers, air receivers, air dryers and air compressors measuring 75cfm to 1,600cfm.
JW's supply a range of compressed air winches, these include air coolers, air receivers, air dryers and air compressors measuring 75cfm to 1,600cfm.
Our range of lifting equipment for hire includes air and electric chain hosts, load cells and slings.
Our range of lifting equipment for hire includes air and electric chain hosts, load cells and slings.

Lebus International Engineers-Wire Rope Spooling Technology

The Lebus spooling system is based on the unique geometry of the drum grooving, custom engineered to the specific application.
The Lebus spooling system is based on the unique geometry of the drum grooving, custom engineered to the specific application. 		A Lebus sleeve is placed onto a winch drum.
A Lebus sleeve is placed onto a winch drum. 		New sleeves can also be retrofitted onto old winch drums to give them a new life.
New sleeves can also be retrofitted onto old winch drums to give them a new life.
The Lebus system ensures that wire rope constantly travels onto and off the drum without any mis-spooling, creating a uniform pattern every time.
The Lebus system ensures that wire rope constantly travels onto and off the drum without any mis-spooling, creating a uniform pattern every time. 		Only with Lebus drums is it possible to calculate with absolute certainty the forces exerted by the rope on the drum. This is because the spooling is totally controlled.
Only with Lebus drums is it possible to calculate with absolute certainty the forces exerted by the rope on the drum. This is because the spooling is totally controlled.

Pacific Hoists-Lifting and Materials-Handling Equipment

Hitachi electric chain hoists.
Hitachi electric chain hoists. 		JDN mining hoists.
JDN mining hoists. 		VITAL chain and lever blocks.
VITAL chain and lever blocks.
JDN air winches.
JDN air winches. 		Pacific’s own range of electric chain hoists.
Pacific’s own range of electric chain hoists.

SIEMAG M-TEC²-Hoisting and Hydrohoisting Technology, Shaft and Slope Hoisting

Headframe. SIEMAG M-TEC² specialises in both complete hoisting and hydrohoisting systems and equipment for underground and open-pit mines.
Headframe. SIEMAG M-TEC² specialises in both complete hoisting and hydrohoisting systems and equipment for underground and open-pit mines. 		Winder with integrated motor. SIEMAG M-TEC² can provide complete systems on a turnkey basis as well as all individual equipment.
Winder with integrated motor. SIEMAG M-TEC² can provide complete systems on a turnkey basis as well as all individual equipment. 		Slope Hoisting Systems are designed for hoisting heavy trucks or skips in the fastest and most economical manner using the shortest distance from mine bottom to the surface.
Slope Hoisting Systems are designed for hoisting heavy trucks or skips in the fastest and most economical manner using the shortest distance from mine bottom to the surface.
Handling System for underground waste disposal. SIEMAG M-TEC² is involved in the development and manufacture of special handling equipment for underground waste disposal.
Handling System for underground waste disposal. SIEMAG M-TEC² is involved in the development and manufacture of special handling equipment for underground waste disposal. 		The SIEMAG M-TEC² Pressure Exchange System (PES) is a state-of-the-art hydraulic system for mine cooling installations as well as the transportation of slurries in pipes.
The SIEMAG M-TEC² Pressure Exchange System (PES) is a state-of-the-art hydraulic system for mine cooling installations as well as the transportation of slurries in pipes.

Svendborg Brakes-Hydraulic Braking Systems

Svendborg Brakes offers reliable, cost-effective and intelligent braking systems.
Svendborg Brakes offers reliable, cost-effective and intelligent braking systems. 		We provide braking systems for wind turbines, mining applications, the crane industry, the marine and offshore industry, and other heavy-duty applications.
We provide braking systems for wind turbines, mining applications, the crane industry, the marine and offshore industry, and other heavy-duty applications. 		Svendborg Brakes works closely with its customers to develop special solutions designed to meet their precise needs for hydraulic braking systems.
Svendborg Brakes works closely with its customers to develop special solutions designed to meet their precise needs for hydraulic braking systems.
Due to the often remote locations and harsh weather conditions common for wind turbine sites, our wind turbine brakes are virtually maintenance-free and reliable.
Due to the often remote locations and harsh weather conditions common for wind turbine sites, our wind turbine brakes are virtually maintenance-free and reliable. 		At our test centre in Denmark we can apply extreme loads to thoroughly test our brakes.
At our test centre in Denmark we can apply extreme loads to thoroughly test our brakes.

Copyright Notice: Copyright for all images on this web site is held by the individual companies providing material for the site. Click on the image concerned to be taken through to the company information.



client logon
Home
Products & Services
Company A-Z
White Papers
Industry Projects
Special Reports
Industry News
Advertise With Us
Jobs & Careers
Events & Exhibitions
Newsletter
New On This Site
About Us
Atom FeedRSS Feed
What is RSS?