KLR Industries - Mining and Drilling Equipment, Drilling Rigs and DHT Hammers and Bits

KLR Industries Limited was incorporated in 1984. KLR Industries manufactures a wide range of mining and drilling equipment, construction equipment, drilling rigs, waterwell drill rigs, direct rotary rigs, DHT hammer and bits.

KLR drilling equipment is designed using state-of-the-art technologies and is manufactured to suit international standards of quality and precision. The company has been accredited with ISO 9001:2000 certification.

TRUCK / SKID / TROLLEY MOUNTED BOREWELL DRILL RIGS

KLR offers truck-mounted borewell drilling rigs capable of drilling through direct rotary or rotary / DTH modes. These drilling rigs have bores of diameter 16in, 12in, 8in or 6in and can drill up to 1,000m. KLR also provides a core-hole drilling feature with drill hole diameter of 115mm. The different drilling equipment models offered are:

KLR 300 DTH / rotary drill rig - it has a drill hole size of 10in and drills up to 984ft. The KLR 300 has a rotary head, which has a maximum speed of 0rpm-100rpm.

KLR DR 100 rotary drill rig - the KLR 100 has a drill hole size of 10in and can drill up to 330ft.

KLR 400 meters DTH / rotary drill rig - the KLR 400 has a drill hole size of 6.5in and drills up to 1,312ft.

KLR-CDR 400 core blast hole drill rig - the KLR CRD 400 drills up to a depth of 2,200ft.

QKH 46 blast hole drill rig - the QKH 46 blast hole drill rig has a drill hole size of 6in and drills up to 300ft.

KLR DTH drill rigs - the KLR DTH drill rigs have a drilling diameter of 6in-10in.

TRACTOR MOUNTED BLAST HOLE / BOREWELL / COREHOLE DRILLING MACHINES

KLR provides hydraulically operated tractor mounted rigs specially designed for fast and cost effective drilling by air, mud or foam drilling methods. The tractor mounted drilling rigs use hole hammers and bits, core barrel and tools, rotary tricone bits and other conventional tools. The drilling rigs have bores of diameter 4.5in, 6in and 6.5in and can drill up to 500ft.

CRAWLER MOUNTED BLAST HOLE DRILLING RIGS

The crawler mounted blast hole drilling rigs are suitable for mines, quarries and construction sites. It is hydraulically operated and has a diesel engine on board. The crawler mounted blast hole has an air compressor and is used for 6in depths.

KLR industries also undertake custom built drilling equipment and machines. It designs, manufactures and supplies these custom built special machinery on the basis of modular, multipurpose design approach.

BACKHOE LOADERS

The two backhoe loader models offered by KLR are:

KLR-BL-400 - KLR-BL-400 has a backhoe loader bucket capacity of 1m³ and an excavator bucket capacity of 0.3m³. The transmission is of power-shuttle type with four forward and reverse speeds.

KLR-VERSATILE-400 - KLR-VERSATILE-400 is a hydrodynamic torque converter with a separate clutch plate drive for forward and reverse gears. It has a bucket capacity of 1m³.

BUTTON BITS AND HAMMERS

KLR button bits and hammers are manufactured from the best quality alloy steel. The button bits and hammers are heat-treated and are fully process controlled.

U-DEX KL DRILLING AND CASING

The U-DEX KL drilling and casing is the most advanced and high-tech model available for high proficiency drilling operations. Its double-pinned pilot bit eliminates the risk of loosening bits down the hoe. It has a button angle and enhanced diameter for the reamer. This facility is available for uniform wear and load distribution over the buttons. Internal driver reamer is available for optimum reaming. The U-DEX KL system is available in 115mm / 152mm-165mm and 152mm-165mm / 215 mm configurations to suit all conventional hammers.

KLR CORE / ROTARY DRILL RIG

KLR core rotary drill rigs have a drilling depth of 150m and a maximum drilling torque of 250kg/m. It has a drill engine with 149.6hp at 2,400rpm.