Quality Control, Testing and Analysis
| APC | ||
Hammer mill HAMILL 250, cleaning device, 5.5kW engine, available with sieve from 1mm to 4mm. |
APC Air Mill 6000, 5.5kW engine, top size for material input 10mm, output <200 µm, mass flow maximal 60kg/h. |
SOLAS: fully automated on-line analyzer with X-ray analyser X-PLORER 9000, sample transport system, flow cell cabinet, Simatic S7 steering unit and Siemens WinCC process visualisation. |
Measurement probe of X-PLORER 9000 installed in the SOLAS flow-cell cabinet. |
APC a competent partner for engineering solutions regarding quality control, automation, sampling and sample preparation |
|
| hrltesting | ||
hrltesting is a contract metallurgical testing and research organisation servicing the mining industry and specialising in process development. |
hrltesting’s core competency is the development of processes for the recovery of base and precious metals from ores and concentrates. |
hrltesting can carry out comprehensive pilot-scale test work in its laboratory facilities, as well as advanced process modeling using a range of mass and heat balance software. |
| Innov-X Systems | ||
Alpha Series™ analyzers provide on-site environmental metals testing. |
The Innov-X Systems' handheld XRF analyzer identifies toxic metals, RCRA and other pollutants in a variety of samples. |
For point-and-shoot simplicity Innov-X offers the smallest, fastest and most versatile handheld XRF analyzer available. |
| Oxford Instruments | ||
Direct surface measurement from a drill hole sample is quick, or measurement can be done from a plastic bag or sample cup in the bench-top mode. |
Fast, on-site elemental analysis of mineral samples on excavations. |
The X-MET5000 withstands all weather conditions and rough treatment and is perfect for the harsh conditions of a mine. |
The rugged and reliable X-MET5000 defines the extremities of ‘hotspots’ in seconds. |
Twin-X for analysis of solids, liquids and powders. |
|
| Scantech International Pty Ltd | ||
Scantech's COALSCAN and GEOSCAN conveyor belts provide on-line analysis of bulk solids for real time process control purposes. |
Scantech process control equipment can be used in the monitoring of coal, iron ore, cement manufacture and a range of metal ores and concentrates. |
A wide range of quality parameters can be measured, including moisture content, elemental content, ash and energy content in coal. |
Analysis takes place on the conveyor, without the need to take samples or to interfere with the flow of material or the operation of the conveyor. |
Our equipment can be used to provide feedback to the mine face to minimise dilution and optimise the extraction of the resource. |
|
| TestSafe Australia | ||
Dust explosions in a controlled test environment. |
Fire-resistance testing of conveyor belting. |
Diesel engine flame-proof testing by highly qualified staff. |
Equipment being tested for intrinsic safety. |
Destructive testing of wire ropes for the mining industry. |
|
| Thermo Scientific | ||
The XLt 500 Series XRF analyzer offers the user the speed and efficiency of x-ray tube excitation, while greatly reducing the regulatory demands typically encountered with isotope based units. |
The NITON XLi 500 Series XRF analyzers are the easiest to operate, lightest in weight, most ergonomic, and the most technologically advanced isotope-based portable XRF instruments in the world. |
Our XRF analyzers offer high performance analysis of metal alloys for PMI, scrap metal recycling and QA/QC; as well as analysis of soils and sediments, environmental monitoring and geochemical mapping. |
The XLi and XLt 500 Series XRF analyzers are rugged, economical and lightweight portable instruments that provide fast and accurate elemental composition of exploration samples, ores, feeds, concentrates and tailings. |
||
